BullCharts : Trailing stops and initial stops tradesim:

Trailing stops and initial stops tradesim: : Hello jazza, Using programs can...

Sun, 17 May 2009 00:15:34 +0000

Author: maximo
Subject: 552
Posted: 17 May 2009 at 12:15am

Hello jazza,

Using programs can be frustrating at times. I am having problems myself with another backtesting program called Wealthlab. I have the code but it's having problems plotting indicators while loading multiple symbols and only trading only once per week rrrr. Anyhow don't give up! I have found a source of Jim berg's full methodology, perhaps I can build some code when I manage to finish the other thing with Wealthlab. Jim's strategy looks to be very sound going on long term trend and temporary oversold periods each one are known to work quite well. Try the simple things first and then build up to something more complicated, works for me.

Click on Download for free with filefactory basic. An interesting read.

http://www.filefactory.com/file/747b74/n/JBTStrategies_rar

Max

Edited by maximo - 17 May 2009 at 2:59pm

Trailing stops and initial stops tradesim: : Hi Maximo,Sorry about my long...

Sun, 10 May 2009 18:22:15 +0000

Author: jazza
Subject: 552
Posted: 10 May 2009 at 6:22pm

Hi Maximo,

Sorry about my long delay in getting back to you.

Thanks for posting the Ferret Formulas for stops re Tradesim. I had big concerted go at trying to make them work in conjunction with the JBerg backtest but could not get them to work. So back to the drawing board.

Cheers for now,

Jazza
< id="gwProxy" ="">< ="jsCall;" id="jsProxy" ="">

Trailing stops and initial stops tradesim: : Hi Maximo,Thanks for the explanation....

Wed, 01 Apr 2009 23:53:21 +0000

Author: jazza
Subject: 552
Posted: 01 Apr 2009 at 11:53pm

Hi Maximo,

Thanks for the explanation. One step further in the coding journey. When I get tradsim I can convert the stoploss into the exact JB formula and see how it goes.

Will keep you posted. Thanks again.

Cheers,

Jazza

Trailing stops and initial stops tradesim: : Hi Jazza, I don't currently...

Wed, 01 Apr 2009 02:43:34 +0000

Author: maximo
Subject: 552
Posted: 01 Apr 2009 at 2:43am

Hi Jazza,

I don't currently use Tradesim, but do understand the logic as it's Bullscript/Metastock language.

From the first line of code: LongEntryPrice := Open; { Buy at market on Open (once entry criteria is met this will get executed in simulation) }

Ref( ,-1) is yesterday and the -0.01 is a fraction under the price bar. Since LLV is the Lowest Low Value it's of 3 bars. The alternative Long initial stop uses an Average True Range of the past 30 bars * 1.5 NOTE: This is not the actual JBerg strategy but it does show a working example of Tradesim coding of stoplosses.

Unfortunately I live way out in country NSW. Send Ferret a privmsg, he might still be around.

Max

Edited by maximo - 01 Apr 2009 at 11:21pm

Trailing stops and initial stops tradesim: : Normal 0 ...

Tue, 31 Mar 2009 22:35:13 +0000

Author: jazza
Subject: 552
Posted: 31 Mar 2009 at 10:35pm

< ="-" ="text/; =utf-8">< name="ProgId" ="Word.">< name="Generator" ="Microsoft Word 11">< name="Originator" ="Microsoft Word 11">

Hi Maximo,

Thanks for collating the screen shots from the wiz programmer‘Ferret’ Thanks to the both of you.

I will have to wait until I purchase Tradsim to see how Igo. Will get onto it soon and let youknow how I go.

Is it possible for you or Ferret to decipher the exit codingin laymen’s terms for me so I can understand what I will be entering?

LongEntryPrice : = Open: (Opening Price)?

LongInitialStop:= Ref(LLV(L,3),-1)-0.01; {OPEN – 1 .5*Ref(ATR(30),-1;}

I understand (LLV(L,10) but can you explain Ref, and-1)-0.01? Assume the second part is openminus 1.5 atr over 30 days ?

LongTrailingStop:- Ref(LLV(L,10),-1)-0.01;

LongTrailingStopTrig:- L< LongTrailingStop

LongTrailingStopPrice:- if (Open< = LongTrailStop,Open, LongTrailStop);

Thanks in advance.

Question: Do you guys by any chance live in Sydney and are able to teach Bullscript?

Cheers for now,

Jazza

Trailing stops and initial stops tradesim: : I'll post these screenshots...

Tue, 31 Mar 2009 01:50:42 +0000

Author: maximo
Subject: 552
Posted: 31 Mar 2009 at 1:50am

I'll post these screenshots which maybe of help to you for Tradesim and JB system. Note: The Berg system has 3 other entry rules which look to be important in it's implementation.

Cheers!

Edited by maximo - 31 Mar 2009 at 1:51am

Trailing stops and initial stops tradesim: : Hi Rod,Much appreciated for your...

Mon, 30 Mar 2009 21:35:25 +0000

Author: jazza
Subject: 552
Posted: 30 Mar 2009 at 9:35pm

Hi Rod,

Much appreciated for your reply. Thanks for pointing out the error. I actually used the ma(H,13,E) for the exit in Tradesim rather than the Mov(H,13,E). I copy/ pasted the (Mov) from a Jim Berg article for the forum. I am not a metastock user but I think mestastock uses (Mov) and Bullcharts uses (ma)

In my Tradesim programing I used the method you suggested. Was able to get entry and exit.

The stops caused me problems. Everywhich way I tried, caused an exit on entry day, causing bizare results. The problem is that stops do require a bullscript. Even the default setting of 2* ATR causes this exit on entry day problem.

I was using a trial 2 week test of the Tradesim which has now expired. I would buy it if I could figure out how to program the stops and trailing stops. Trouble is that the extensive manual is written for Metastock. There is minimal written info on using Tradesim with Bullcharts!

Would be very interested if you could let me know how you achieved yourinitial stop and trailing stop criteria in the back test. Also did theBerg system stack up?

Cheers for now,

Tony

Trailing stops and initial stops tradesim: : The coding you are using for the...

Thu, 26 Mar 2009 15:49:11 +0000

Author: rcameron
Subject: 552
Posted: 26 Mar 2009 at 3:49pm

The coding you are using for the exit has an error, rather than Mov(H,13,E) try ma(H,13,E). Too start learning how to run Tradesim scans, my suggestion is that you use Bullcharts pre-coded indicators in the Entry and Exit sections. Once you get the knack then use Bullscript - in other words take the easy way out in the early stages.

Like you I wanted to backtest Berg's system so I modified the Bullcharts code and wrote the following indicator so that I could select each of the Entry, Exit etc criteria when writing a scan without using Bullscript and risking an error in coding. You can easily select the Entry and Exit criteria, but a few tips for you using an example.

First, in setting up the Tradesim scan go to the Entry tab and select "New", in the Category dropbox select "is an indicator signal" and then in the indicator drop box below the Category drop box select JB Volatility Profit Taker 1 (or the name you apply to the code provided below), then click on the "Parameters" button and select "Entry"i.e. Berg's blue bar) in the Marker Drop box, then "OK". Repeat this process in the Exit tab except select "Exit" or "Stopped out" or repeat if you want to test with the Stop and Profit taker exit.

Complete the other steps in setting up the scan and then run it. It is relatively straight forward but remember that Entry and Exit criteria in my coding are "indicator signals" and cannot be seen unless you select the "is an indiactor signal" in the Category drop box. Make sure you understand the differences between each category.

It is a bit difficult to convey clearly what I mean but let me know if you need any further clarification.

Cheers Rod

JB Volatility Profit Taker 1

[citation="'Share Traders Handbook', Jim Berg;

'A Winning Combination for Traders', Jim Berg, Leverage July 2004 Issue 32 p15-17 www.leveragemag.com.au"]

[target=Price; author=Cameron, Rod; category=Stop Loss|Volatility]

al := input("ATR Length", 10, 1);

am := input("ATR Multiplier", 2, 0);

use15 := input("Combine with P15 1=yes, 0=no", 1, 0, 1);

mamethod := inputma("MA method",EXPONENTIAL);

n := input("MA Time periods",13,1);

lhn := input("Low High periods",20,1);

sn := input("Stop High periods",15,1);

[name=JBPT; color=Orange]

pt := ma(H,n,mamethod) + am*ATR(al);

pt;

[name=Stop; color=Black]

ts := hhv(C-am*ATR(al),if(use15,sn,1));

ts;

{ Markers }

{ Note: These markers do not include the stop after initial entry, which is placed just below the previous trough }

entry := cross(C,(llv(L,lhn)+am*atr(al)));

takeprofit := cross(C,pt);

stopped := Cand hist(Cand hist(C>=ts,2);

inMarket :=

if (entry, true,

if (takeprofit or stopped, false, prev));

[name=Enter; linestyle=marker; color=Green; marker=type3; tooltip="Volatility Start"]

inMarket and not hist(inMarket,1);

[name=Exit; linestyle=marker; color=Green; marker=type1]

not inMarket and hist(inMarket,1) and takeprofit;

[name=Stopped Out; linestyle=marker; color=Red; marker=type2]

not inMarket and hist(inMarket,1) and stopped and not takeprofit;

{ Bar colours }

r1 := (llv(L,lhn) + am*atr(al));

r2 := (hhv(H,lhn) - am*atr(al));

jbmode := if (C>r1, 1, if (Cprev) );

[linestyle=PriceColor]

[name=Rising; color=rgb(30,70,190)] jbmode = 1;

[name=Oversold; color=FireBrick] jbmode = -1;

Trailing stops and initial stops tradesim: : Hi all, Hoping someone can...

Mon, 23 Mar 2009 18:55:03 +0000

Author: jazza
Subject: 552
Posted: 23 Mar 2009 at 6:55pm

Hi all,

Hoping someone can help. Trying to backtest the JB profitaker on tradesim. Can achieve the main entry and exit criteria of:

ENTRY trigger occurs when the closing price has moved the distance from the recent low equivalent to two times the average true range of the last ten days: C>(LLV(L,20) + 2*ATR(10))
EXIT on a CLOSE above moving average of Highs plus 2 times the ten day ATR: Mov(H,13,E) + 2*ATR(10)

However cannot get the programming to work for the stop or trailing stop as below:

STOP: Initial stop is just under the recent low but once prices continue to rise then use a Volatility Trailing Stop. Exit after two consecutive closes below trailing stop. The stop is two times the ATR subtracted from the close: HHV(C-2*ATR(10),15)

Any programming wiz people out there that can help.

Thanks in advance,

Jazza